Area rugs are a great way to add warmth and character to your decor, but after prolonged use, they will require a fantastic cleaning to look like brand new. For most contemporary rugs, cleaning can be a once-a-year DIY job which saves you the expense of specialist cleaning. If your rug is labeled with specific cleaning instructions, follow these.
Generally, area rugs only need to be deep cleaned yearly. Listed below are a Couple of ways to Find out If It’s time for Rug Cleaning in Pacific Palisades:
1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.
2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.
3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.
Cleaning a rug just requires a few basic tools. You may need:
Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan
Prior to cleaning a rug, read the care instructions on the rug’s tag. Try to select a time to clean your rugs when there will be three or four sunny, hot days together. It may be a lot easier to clean your rugs outside, and sun and warm atmosphere will help them dry more quickly and thoroughly. Additionally, the sun is a natural and effective deodorizer and this will keep most of the dust and dirt from the house. If an outdoor area is not accessible, use any floor area which moisture won’t damage (like concrete or vinyl flooring in the kitchen or garage.)
Shake or beat: Require smaller rugs and medium-sized rugs outdoors and provide them a fantastic shake to release loose dust and dirt. If the rug is large, ask a partner for help to hang the rug above a porch rail or above a couple solid chairs. Use a broom or rug beater to reach on the rug around to loosen deeply embedded dirt. Don’t forget to shake out the rug mat also.
Examine the rug for colorfastness: Prior to cleaning a rug with any kind of solution, it needs to be examined for colorfastness to prevent damage. Dab the cleaning solution on a tiny corner of this rug with a towel. Check to find out whether any color transfers to the towel. Allow the test spot dry completely, then check again to make certain colours have not bled or faded.
Scrub, if needed: If the rug is colorfast, apply the soap solution to the rug with a soft-bristle brush or sponge. Start at one end of the rug. Dip the sponge/brush to the cleaning solution. Don’t over-wet the fibers–only use as much as needed. Work in a 3- by 3-foot location. Rinse the sponge/brush frequently so the dirt will not be transferred.
Scrub the rug completely: It’s important not to leave any soap substance on the rug. Soap will attract more dirt. Dip a clean sponge in the rinse water and then remove any soap from the region just cleaned.
Blot: Drive as much excess water as you can with a squeegee and moving from the direction of this rug nap. Scrub, rinse and blot an area before moving to the next.
Dry: Hang up the rug to dry, or put the rug level, face-up and prop the underside with risers to permit for air circulation. Allow the rug dry completely prior to bringing it back inside, rotating it occasionally to promote even drying. Once inside, turn on fans to promote more air flow and help the rug dry completely.
Adjust rug fibers: When the rug has dried thoroughly, lightly examine the rug with a vacuum or a soft-bristle brush to refresh the fibers.
Steam cleaners: If your rug is extremely soiled, it could be worth it to let a commercial steam cleaner. Vacuum the rug first, then follow the manufacturer’s directions about how to run the machine.
Check related blogs about Rug Cleaning:
Make A Weekly Cleaning Schedule in Pacific Palisades
Why You Need To Buy A Rug in Pacific Palisades
