Area rugs are a excellent way to add warmth and character to your decor, but after prolonged use, they will need a fantastic cleaning to seem like new. For many contemporary rugs, cleaning may be a once-a-year DIY job which saves you the cost of professional cleaning. If your rug is labeled with particular cleaning instructions, follow those.

Generally, area rugs only need to be deep cleaned yearly. Here are a Couple of ways to Find out if it is time for Rug Cleaning in Winnetka :

1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.

2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.

3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.

Cleaning a rug just requires a couple of basic tools. You will need:

Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan

Try to pick a time to clean your rugs when there will be a few glowing, hot days together. It could be easier to clean your rugs outside, and sun and warm air will help them dry more quickly and thoroughly. Plus, the sun is a natural and effective deodorizer and this will keep the majority of the dirt and dust from the house. If an outdoor area is not accessible, use any floor area that moisture won’t damage (like vinyl or concrete floor in the kitchen or kitchen.)

Shake or beat: Require smaller rugs and medium-sized rugs outside and give them a fantastic shake to discharge loose dust and dirt. If the rug is large, request a spouse for assistance to hang the rug over a porch railing or above a couple of solid chairs. Use a broom or rug beater to hit the rug all over to loosen deeply embedded dirt. Don’t forget to shake the rug pad too.

Fill the other bucket with clean water.

Examine the rug for colorfastness: Prior to cleaning a rug with any kind of solution, it needs to be tested for colorfastness to avoid harm. Dab the cleaning solution on a tiny corner of the rug with a towel. Check to find out whether any color transfers to the towel. Let the test spot dry completely, then check again to make sure colors have not bled or faded.

Scrub, if necessary: If the rug is colorfast, apply the soap solution to the rug with a soft-bristle brush or sponge. Start at one end of this rug. Dip the sponge/brush into the cleaning solution. Don’t over-wet the fibers–just use as much as required. Function in a 3- by 3-foot area. Rinse the sponge/brush regularly so the dirt won’t be transferred.

Rinse the rug completely: It is important not to leave any soap substance on the rug. Dip a clean sponge in the rinse water and then remove any soap in the area just cleaned.

Blot: Drive as much excess water as you can with a squeegee and moving in the direction of the rug nap. Scrub, rinse and blot an area before going to the next.

Let the rug dry thoroughly prior to bringing it back inside, rotating it periodically to promote even drying. Once inside, turn on fans to encourage more air flow and help the rug dry completely.

Adjust rug fibers: When the rug has dried completely, lightly examine the rug using a vacuum or a soft-bristle brush to refresh the fibers.

Steam cleaners: If your rug is very soiled, it may be well worth it to rent a commercial steam cleaner. Vacuum the rug first, then follow the manufacturer’s instructions on the best way best to run the machine.

Check related blogs about Rug Cleaning:
How to Clean a Rug in Winnetka