Can your area rugs use a deep clean? Discover how to clean a rug yourself and you can bring all your floor coverings back to life whenever you prefer. Area rugs may bring a room together, but they also takes a beating, in the foot traffic to spills and pets. After a while, vacuuming just isn’t sufficient to receive it truly clean–and that is when knowing the way to do it yourself comes in super easy.
Area Rug Cleaning in Palos Verdes Peninsula is a project you can easily take on your own. There is no need to hire expert rug cleaners for your job –unless the rug is extremely fragile (for example, an antique rug, Persian rug, or oriental rug).
Note: There is no requirement to clean rugs on a program. Keep reading to find out how to refresh those well-worn area rugs so they look as good as they did when you unrolled them.
1. Collect Your Tools and Supplies
Bucket
Soft-bristle brush or sponge
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum
2. Remove Dirt and Debris
Gently vacuum about the rug on either side. You want to make sure every last piece of debris has been gone. If you have pets, use the brush attachment to get any lingering stray hairs.
3. Mix Your Cleaner
If it comes to the real cleaning solution, you may use a rug shampoo. Whatever shampoo you choose, follow its precise instructions (found on the bottle) for mixing.
4. Do a Color Test
Before you begin scrubbing, make sure that the cleaner doesn’t cause the colors to run. Examine the alternative to the corner of the rug to be certain it’s colorfast. If the color does not bleed, it is safe to proceed to the next step.
5. Wash the Rug
Allow the cleaner sit on the rug to get a five minutes before you begin rinsing. Anything less than that and you’re going to shortchange the cleaning process.
6. Rinse the Rug
Scrub the soap out of this rug using a garden hose or buckets of clean water. Be certain all of the cleaning solution is totally removed from the area rug along with the runoff water is crystal clear.
7. Remove Extra Water
At this point, you’ll want to do away with as much surplus water in the rug as you can so it will dry quicker.
8. Permit the Rug Dry
The next-to-last step to clean an area rug is just letting it dry. Lay the rug flat and allow the cover of the rug to dry thoroughly. After that, turn it over to allow the bottom side dry. Fans can help hasten the procedure. Be certain that the rug is totally dry before you return it to the area.
9. Vacuum or Brush Out the Rug
During the cleaning process, fibers and threads may get compacted and compacted. Revive them by running a vacuum within the now-dry rug, or brush with a foul-smelling brush. Now you are finished, and can enjoy your freshly cleaned carpet. You understand how to clean an area rug your self, and you can complete the job whenever you prefer.
Check related blogs about Rug Cleaning:
Area Rugs in Palos Verdes Peninsula
How Much Does It Cost To Dry Clean A Rug in Palos Verdes Peninsula
