What Is The Ideal Way To Clean A Rug?
Area rugs are a great way to add warmth and personality to your decoration, but after prolonged use, they will require a good cleaning to seem like brand new. For many modern rugs, cleaning may be a once-a-year DIY job that saves you the expense of professional cleaning. If your rug is tagged with specific cleaning instructions, follow these. Otherwise, use this guide from Green Carpet’s Rug Cleaning to understand how to clean a rug and general rug maintenance hints.
Generally, area rugs just have to be deep cleaned yearly. Here are a few ways to determine if it is time for Rug Cleaning in Signal Hill:
1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.
2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.
3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.
Cleaning a rug only requires a few basic tools. You may need:
Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan
Try to select a time to clean your rugs when there is going to be a few glowing, hot days together. It could be a lot easier to clean your rugs outside, and sun and warm air will help them dry faster and thoroughly. Additionally, the sun is a natural and effective deodorizer, which will keep the majority of the dirt and dust out of the house. Whether an outside area is not available, use any floor area that moisture won’t damage (like concrete or vinyl floor in the kitchen or kitchen.)
Shake or beat: Take smaller rugs and darkened rugs outside and give them a good shake to discharge loose dirt and dust. If the rug is large, ask a partner for assistance to hang the rug over a porch railing or above a couple of solid chairs. Do not forget to shake the rug pad too.
Examine the rug for colorfastness: Prior to cleaning a rug with any type of solution, it needs to be examined for colorfastness to avoid harm. Dab the cleaning solution on a tiny corner of the rug with a towel. Let the test place dry completely, then check again to make certain colors have not bled or faded.
Start at one end of this rug. Dip the sponge/brush into the cleaning solution. Do not over-wet the fibers–just use as much as needed. Use gentle pressure to gently scrub the rug. Work in a 3- from 3-foot area. Rinse out the sponge/brush frequently so the dirt won’t be transferred.
Rinse the rug completely: It is important not to leave any soap material on the rug. Dip a clean sponge in the rinse water and then remove any soap from the region just cleaned.
Blot: Push out as much excess water as you can with a squeegee and moving from the path of the rug nap. Use the towels to absorb any excess moisture. Scrub, rinse and blot a place before moving to the next.
Let the rug dry completely prior to bringing it back indoors, rotating it occasionally to promote even drying. Once inside, turn on fans to encourage greater air circulation and help the rug dry completely.
Adjust rug fibers: When the rug has dried completely, lightly go over the rug with a vacuum or a soft-bristle brush to refresh the fibers.
Steam cleaners: If your rug is very soiled, it could be worth it to rent a commercial steam cleaner. Vacuum the rug first, then follow the manufacturer’s directions about the best way to operate the machine.
Check related blogs about Rug Cleaning:
Make A Weekly Cleaning Schedule in Signal Hill
What On Earth Are Area Rugs Anyway in Signal Hill
