How Are Rugs Cleaned?
Can your area rugs utilize a clean? Learn how to clean a rug and you’re able to bring all of your floor coverings back to life whenever you prefer. After a while, vacuuming only isn’t enough to get it really clean–and that’s when knowing how to do it yourself comes in super handy.
Area Rug Cleaning in Antioch is a job you can easily take on yourself. There’s no need to employ expert rug cleaners to your job –unless the rug is extremely fragile (for example, an antique rug, Persian rug, or oriental rug).
Note: There’s no requirement to clean rugs on a schedule. Instead, you should simply clean the rugs when they are visibly dirty or have an odor. Keep reading to find out how to refresh those well-worn area rugs so they look as great as they did when you unrolled them.
1.
Bucket
Soft-bristle sponge or brush
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum
2. Remove Dirt and Debris
Gently vacuum about the rug on both sides. You want to make sure every last bit of debris is gone. If you have pets, then use the brush attachment to acquire any lingering stray hairs.
3. Mix Your Cleaner
If it comes to the real cleaning solution, you can use a rug shampoo. Whatever shampoo you choose, follow its precise instructions (found on the bottle) for blending.
Alternatively, you can even use gentle dish detergent mixed in a bucket with warm water.
4. Do a Colour Test
Before you begin scrubbing, be sure that the cleaner does not cause the colors to run. Test the solution on the corner of the rug to make sure it’s colorfast. If the color does not bleed, it is safe to proceed to the next step.
5. Wash the Rug
With a sponge or soft-bristle brush, work the cleaning solution into a lather on the rug. Allow the cleaner sit on the rug for a five minutes before you begin rinsing. Anything less than this and you’re going to shortchange the cleaning process.
6. Rinse the Rug
Rinse the soap out of this rug using a garden hose or buckets of clean water. Be sure all the cleaning solution is totally taken out of the area rug along with the runoff water is crystal clear.
7. Remove Extra Water
Now, you’ll want to get rid of as much excess water from the rug because possible so it will dry faster. It’s possible to use a wet-dry vacuum should you have one, or use a squeegee in the direction of the rest.
8. Permit the Rug Dry
Lay the rug level and permit the top of the rug to dry thoroughly. After that, turn it over to allow the bottom side dry. Fans can help hasten the procedure. Make sure the rug is fully dry before you return into the room.
9.
During the cleaning process, fibers and threads may get compacted and compacted. Revive them by conducting a vacuum over the now-dry rug, or brush them with a soft-bristled brush. Now you’re finished, and may enjoy your freshly cleaned carpet. You understand how to clean an area rug yourself, and you can finish the job whenever you prefer.
Check related blogs about Rug Cleaning:
Exactly-How-A-Rug-Can-Make-Your-Room-Perfect in Antioch
How-Can-I-Clean-My-Rug-At-Home in Antioch
