Could your area rugs use a deep clean? Discover how to clean a rug and you can bring all of your flooring coverings back to life when you like. Area rugs may bring a room together, but they also requires a beating, from foot traffic to spills and pets. After a while, vacuuming just is not sufficient to receive it truly clean–and that’s when knowing the way to do it yourself comes in super easy.

Area Rug Cleaning in Agoura Hills is a job you can readily take on yourself.

Note: There is no need to clean rugs on a program. Alternatively, you should just clean the rugs when they are visibly dirty or have an odor. Keep reading to learn how to Combine those well-worn area rugs so that they look as great as they did when you first unrolled them.

1. Gather Your Tools and Supplies

Bucket
Soft-bristle sponge or brush
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Remove Dirt and Debris
Gently vacuum about the rug on both sides. You want to be certain every last bit of debris has been gone. If you have pets, then use the brush attachment to get any lingering stray hairs.

3. Mix Your Cleaner
When it comes to the actual cleaning solution, you may use a rug shampoo. Whatever shampoo you choose, follow its specific instructions (found on the bottle) for blending.

Alternatively, you can also use gentle dish soap mixed in a bucket with warm water.

4. Do a Color Test
Before you begin scrubbing, make sure that the cleaner does not cause the colors to run. Test the solution to the corner of the rug to be certain it is colorfast. If the color does not bleed, it is safe to move on to another step.

5. Wash the Rug
With a sponge or soft-bristle brush, work the cleaning solution into a lather on the rug. Allow the cleaner sit on the rug to get a couple of minutes before you begin rinsing. Anything less than this and you’ll shortchange the cleaning procedure.

6. Rinse the Rug
Rinse the soap from this rug using a garden hose or buckets of clean water. Be certain all the cleaning solution is completely taken out of the area rug along with the runoff water is crystal clear.

7. Remove Extra Water
Now, you’ll want to do away with as much surplus water from the rug as possible so it’ll dry faster. It’s possible to use a wet-dry vacuum if you have one, or use a squeegee in the direction of the nap.

8. Let the Rug Dry
Lay the rug level and allow the top of the rug to dry thoroughly. Then, turn it over to allow the bottom side dry. Fans can help speed up the process. Make sure the rug is totally dry before you return into the room.

9.
During the cleaning process, fibers and threads may get compacted and squished. Revive them by running a vacuum over the now-dry rug, or brush them with a soft-bristled brush. Now you’re finished, and can enjoy your freshly cleaned carpet. You understand how to clean an area rug your self, and you’re able to finish the job whenever you prefer.

Check related blogs about Rug Cleaning:
Business Cleaning Business — A Strategy For The Future in Agoura Hills
How Much Does It Cost To Dry Clean A Rug in Agoura Hills