Can your area rugs utilize a deep clean? Learn how to clean a rug and you can bring all your flooring coverings back to life when you prefer. After a while, vacuuming only isn’t enough to receive it truly clean–and that is when knowing how to do it yourself comes in super easy.

Area Rug Cleaning in Encino is a project you can readily take on your own.

Notice: There is no need to clean rugs on a program. Keep reading to learn how to refresh those well-worn area rugs so that they look as great as they did when you first unrolled them.

1.

Rug shampoo (or mild dish soap)

Bucket
Soft-bristle brush or sponge
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Remove Dirt and Debris
Gently vacuum on the rug on both sides. You should be certain every last piece of debris is gone.

3. Mix Your Cleaner
When it comes to the real cleaning solution, you may use a rug shampoo. Whatever shampoo you opt for follow its specific directions (found on the jar ) for mixing.

Don’t use hot water as it can shrink the rug or cause fading.

4. Do a Colour Test
Before you begin scrubbing, be sure the cleaner does not cause the colors to run. Test the solution to the corner of the rug to be certain it is colorfast. If the color does not bleed, it’s safe to proceed to another step.

5. Wash the Rug
Using a sponge or soft-bristle brush, work the cleaning solution into a lather on the rug. Allow the cleaner sit on the rug to get a five minutes before you start rinsing. Anything less than this and you’re going to shortchange the cleaning process. Give it those five minutes to install and get started lifting dirt away.

6. Rinse the Rug
Scrub the soap from this rug using a garden hose or buckets of clean water. Make sure all the cleaning solution is completely removed from the area rug and the runoff water is crystal clear.

7. Remove Extra Water
Now, you’ll want to get rid of as much excess water in the rug as possible so it’ll dry faster. It’s possible to use a wet-dry vacuum should you have one, or use a squeegee at the direction of the nap.

8. Let the Rug Dry
The next-to-last step to clean an area rug is simply letting it dry. Lay the rug flat and permit the top of the rug to dry thoroughly. Then, flip it over to allow the bottom side dry. Fans may help speed up the procedure. Be certain that the rug is totally dry before you return it to the area.

9.
During the cleaning process, threads and fibers may get compacted and compacted. Revive them by conducting a vacuum within the now-dry rug, or brush with a soft-bristled brush. Now you’re finished, and may enjoy your freshly cleaned carpet. You know how to clean an area rug your self, and you can complete the job whenever you like.

Check related blogs about Rug Cleaning:
How Often Should I Clean My Rugs in Encino