How Are Rugs Cleaned?

Can your area rugs utilize a deep clean? Discover how to clean a rug and you can bring all of your floor coverings back to life when you prefer. After a while, vacuuming only isn’t sufficient to receive it really clean–and that’s when knowing how to do it yourself comes in super handy.

Area Rug Cleaning in Fillmore is a project you can readily take on yourself. There is no need to employ expert rug cleaners to your job –unless the rug is extremely delicate (by way of example, an antique rug, Persian rug, or oriental rug).

Notice: There’s no requirement to clean rugs on a schedule. Keep reading to find out how to refresh those well-worn area rugs so they look as good as they did when you first unrolled them.

1. Collect Your Tools and Supplies

Bucket
Soft-bristle sponge or brush
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Remove Dirt and Debris
Thoroughly vacuum on the rug on either side. You want to make sure every last bit of debris is gone. For those who have pets, then use the brush attachment to acquire any lingering stray hairs.

3. Mix Your Cleaner
When it comes to the real cleaning alternative, you may use a rug shampoo. Whatever shampoo you choose, follow its precise instructions (found on the bottle) for mixing.

Do not use hot water since it could shrink the rug or cause fading.

4. Do a Color Test
Before you begin scrubbing, be sure that the cleaner doesn’t cause the colors to run. Examine the alternative on the corner of the rug to be certain it’s colorfast. If the color does not bleed, it is safe to proceed to the next step.

5. Wash the Rug
Let the cleaner sit on the rug for a couple of minutes before you start rinsing. Anything less than this and you’ll shortchange the cleaning procedure.

6. Rinse the Rug
Scrub the soap out of the rug using a garden hose or buckets of clean water. Make certain all of the cleaning solution is totally taken out of the area rug along with the runoff water is crystal clear.

7. Remove Extra Water
At this point, you are going to want to get rid of as much surplus water in the rug because you can so it’ll dry quicker.

8. Let the Rug Dry
Lay the rug level and allow the top of the rug to dry completely. After that, turn it over to allow the bottom side dry. Fans can help hasten the process. Make sure the rug is fully dry before you return into the area.

9. Vacuum or Brush Out the Rug
During the cleaning process, threads and fibers can get compacted and squished. Revive them by running a vacuum over the now-dry rug, or brush them with a foul-smelling brush. Now you are finished, and can enjoy your newly cleaned carpet. You know how to clean an area rug yourself, and you can finish the job when you like.

Check related blogs about Rug Cleaning:
Area Rugs in Fillmore
How Can I Clean My Rug At Home in Fillmore