Could your area rugs utilize a deep clean? Learn how to clean a rug yourself and you can bring all your flooring coverings back to life whenever you prefer. After a while, vacuuming only isn’t enough to receive it really clean–and that is when knowing the way to do it yourself comes in super handy.
Area Rug Cleaning in Sunnyvale is a project you can easily take on your own. There’s no need to employ professional rug cleaners for the task–unless your rug is extremely fragile (by way of example, an antique rug, Persian rug, or oriental rug).
Notice: There is no requirement to clean rugs on a schedule. Read on to find out how to Combine those well-worn area rugs so they look as good as they did when you first unrolled them.
1.
Rug shampoo (or mild dish soap)
Bucket
Soft-bristle sponge or brush
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum
2. Eliminate Dirt and Debris
Thoroughly vacuum on the rug on either side. You want to be certain every last bit of debris has been gone. For those who have pets, use the brush attachment to acquire any lingering stray hairs.
3. Mix Your Cleaner
When it comes to the real cleaning alternative, you may use a rug shampoo. Whatever shampoo you opt for follow its precise directions (found on the bottle) for mixing.
Don’t use hot water as it can shrink the rug or cause fading.
4. Do a Color Test
Before you start scrubbing, make sure that the cleaner doesn’t cause the colors to run. Test the alternative to the corner of the rug to make sure it’s colorfast. If the color does not bleed, it’s safe to proceed to another step.
5. Wash the Rug
Using a sponge or soft-bristle brush, work the cleaning solution into a lather on the rug. Allow the cleaner sit on the rug for a couple of minutes before you begin rinsing. Anything less than that and you’re going to shortchange the cleaning procedure.
6. Rinse the Rug
Be certain all of the cleaning solution is totally taken out of the area rug along with the runoff water is crystal clear.
7. Remove Extra Water
At this point, you are going to want to do away with as much surplus water from the rug because possible so it’ll dry quicker.
8. Permit the Rug Dry
The next-to-last step to clean an area rug is simply allowing it to dry. Lay the rug level and permit the top of the rug to dry completely. Then, flip it over to allow the bottom side dry. Fans can help hasten the procedure. Make sure the rug is fully dry before you return it to the room.
9. Vacuum or Brush Out the Rug
During the cleaning process, fibers and threads may get compacted and squished. Revive them by running a vacuum over the now-dry rug, or brush them with a foul-smelling brush. Now you’re finished, and can enjoy your freshly cleaned carpet. You understand how to clean an area rug your self, and you’re able to finish the job whenever you like.
Check related blogs about Rug Cleaning:
10 Tips to Know Before Getting a Rug in Sunnyvale
How to Clean a Rug in Sunnyvale
