Can your area rugs use a deep clean? Learn how to clean a rug yourself and you’re able to bring all your floor coverings back to life whenever you like. After a time, vacuuming just is not enough to get it truly clean–and that is when knowing how to do it yourself comes in super easy.

Area Rug Cleaning in Woodland Hills is a job you can easily take on yourself.

Notice: There’s no requirement to clean rugs on a schedule. Read on to find out how to refresh those well-worn area rugs so they look as good as they did when you first unrolled them.

1. Collect Your Tools and Supplies

Here’s what you’ll Have to Have on hand to complete a successful area Rug Cleaning in Woodland Hills:

Rug shampoo (or mild dish soap)

Bucket
Soft-bristle brush or sponge
Water
Optional:
Rubber gloves
Garden hose
Wet-dry vacuum

2. Remove Dirt and Debris
Gently vacuum on the rug on either side. You should be certain every last bit of debris is gone. For those who have pets, use the brush attachment to acquire any lingering stray hairs.

3. Mix Your Cleaner
When it comes to the actual cleaning solution, you can use a rug shampoo. Whatever shampoo you opt for follow its specific directions (found on the jar ) for mixing.

As an alternative, you can also use mild dish detergent mixed in a bucket with warm water.

4. Do a Color Test
Before you begin scrubbing, make sure the cleaner does not cause the colors to run. Examine the solution to the corner of the rug to make sure it’s colorfast. If the color does not bleed, it is safe to move on to another step.

5. Wash the Rug
With a sponge or soft-bristle brush, work the cleaning solution into a lather on the rug. Let the cleaner sit on the rug to get a five minutes before you start rinsing. Anything less than that and you’ll shortchange the cleaning process. Give it those five minutes to install and start lifting away dirt.

6. Rinse the Rug
Scrub the soap out of the rug using a garden hose or buckets of clean water. Make sure all of the cleaning solution is completely taken out of the area rug and the runoff water is crystal clear.

7. Remove Excess Water
At this point, you’ll want to get rid of as much surplus water from the rug as possible so it will dry faster.

8. Let the Rug Dry
Lay the rug level and allow the cover of the rug to dry completely. Then, flip it over to allow the bottom side dry. Fans can help hasten the procedure. Be certain that the rug is totally dry before you return into the room.

9.
During the cleaning process, threads and fibers may get compacted and compacted. Revive them by conducting a vacuum within the now-dry rug, or brush them with a foul-smelling brush. Now you are finished, and can enjoy your newly cleaned carpet. You know how to clean an area rug your self, and you’re able to finish the job whenever you prefer.

Check related blogs about Rug Cleaning:
Exactly How A Rug Can Make Your Room Perfect in Woodland Hills
How Can I Clean My Rug At Home in Woodland Hills