Area rugs are a great way to add warmth and personality to your decoration, but after prolonged use, they will require a good cleaning to seem like new. For most contemporary rugs, cleaning can be a once-a-year DIY job which saves you the cost of professional cleaning. If your rug is labeled with particular cleaning instructions, follow those. Otherwise, use this manual from Green Carpet’s Rug Cleaning to learn how to clean a rug and basic rug maintenance hints.
Generally, area rugs just need to be deep cleaned annually. Here are a Couple of ways to determine If It’s time for Rug Cleaning in Palmdale:
1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.
2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.
3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.
Cleaning a rug only requires a couple of basic tools. You will need:
Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan
Try to select a time to clean your rugs when there will be a few sunny, hot days together. It could be a lot easier to clean your rugs outside, and sunshine and warm atmosphere will help them dry more quickly and thoroughly. Plus, the sunlight is a natural and effective deodorizer and this will keep the majority of the dirt and dust from the home. If an outdoor area is not available, use any floor area that moisture won’t damage (like concrete or vinyl flooring in the kitchen or garage.)
Shake or conquer Require smaller rugs and medium-sized rugs outdoors and give them a good shake to discharge loose dust and dirt. If the rug is large, request a partner for assistance to hang the rug above a porch rail or above a couple solid chairs. Use a broom or rug beater to reach the rug around to loosen deeply embedded dirt. Do not forget to shake the rug mat also.
Mix the cleaner: Create a cleaning solution as directed by your chosen rug shampoo, or mix two to three teaspoons of mild dish soap into among those 5-gallon buckets with warm water.
Test the rug for colorfastness: Before cleaning a rug with any type of solution, it needs to be tested for colorfastness to prevent harm. Dab the cleaning solution on a tiny corner of this rug with a towel. Check to see if any color transfers to the towel. Allow the test spot dry thoroughly, then check again to make sure colors haven’t bled or faded.
Start at one end of this rug. Dip the sponge/brush to the cleaning solution. Do not over-wet the fibers–just use as much as needed. Function in a 3- by 3-foot area. Rinse the sponge/brush frequently so the dirt will not be transferred.
Scrub the rug completely: It is important not to leave any soap substance on the rug. Dip a clean sponge in the rinse water and then remove any soap from the region just cleaned.
Blot: Push out as much excess water as you can using a squeegee and moving from the path of the rug nap. Use the towels to absorb any excess moisture. Scrub, rinse and blot an area before going into the next.
Allow the rug dry completely prior to bringing it back indoors, rotating it periodically to promote even drying. Once inside, turn on fans to promote more air circulation and help the rug dry completely.
Adjust rug fibers: Once the rug has dried thoroughly, lightly examine the rug using a vacuum or a soft-bristle brush to refresh the fibers.
Steam cleaners: If your rug is very soiled, it could be worth it to let a commercial steam cleaner. Vacuum the rug first, then follow the manufacturer’s directions about the best way best to run the machine.
Check related blogs about Rug Cleaning:
Is It Worth Getting Carpets Professionally Cleaned in Palmdale
What Type Of Rug Is Easiest To Keep Clean in Palmdale
