Area rugs are a excellent way to add warmth and personality to your decor, but after prolonged use, they will need a fantastic cleaning to seem like brand new. For many modern rugs, cleaning can be a once-a-year DIY job which saves you the cost of professional cleaning. If your rug is tagged with specific cleaning instructions, follow those. Otherwise, use this guide from Green Carpet’s Rug Cleaning to learn how to clean a rug and general rug maintenance hints.
Generally, area rugs only need to be deep cleaned annually. Here are a Couple of ways to determine if it is time for Rug Cleaning in Rosemead:
1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.
2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.
3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.
Cleaning a rug just requires a few basic tools. You will need:
Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan
Before cleaning a rug, read the care instructions on the rug’s tag. Try to select a time to clean your rugs when there is going to be a few glowing, hot days together. It could be a lot easier to clean your rugs outdoors, and sunshine and warm air will help them dry more quickly and thoroughly. Additionally, the sun is a natural and effective deodorizer, which will keep most of the dust and dirt out of the house. Whether an outdoor area is not available, use any floor area which moisture will not damage (like concrete or vinyl flooring in the kitchen or kitchen.)
Shake or conquer Take smaller rugs and darkened rugs outdoors and give them a fantastic shake to discharge loose dirt and dust. If the rug is large, ask a partner for help to hang the rug above a porch rail or over a couple solid chairs. Use a broom or rug beater to hit the rug all over to loosen deeply embedded dirt. Don’t forget to shake the rug pad too.
Fill another bucket with clean water.
Test the rug for colorfastness: Prior to cleaning a rug with any type of solution, it needs to be examined for colorfastness to prevent harm. Dab the cleaning solution on a small corner of the rug with a towel. Allow the test spot dry completely, then check again to make certain colors haven’t bled or faded.
Dip the sponge/brush into the cleaning solution. Don’t over-wet the fibers–only use as much as needed. Work in a 3- by 3-foot area. Rinse out the sponge/brush frequently so the dirt will not be transferred.
Rinse the rug thoroughly: It’s important not to leave any soap material on the rug. Dip a clean sponge at the rinse water and then remove any soap in the area just cleaned.
Blot: Push out as much excess water as you can with a squeegee and moving from the path of this rug nap. Use the towels to absorb any excess moisture. Scrub, rinse and blot a place before moving into the next.
Allow the rug dry thoroughly before bringing it back inside, rotating it periodically to promote even drying. Once inside, turn on fans to encourage greater air circulation and assist the rug dry more completely.
Adjust rug fibers: When the rug has dried thoroughly, lightly go over the rug with a vacuum or a soft-bristle brush to refresh the fibers.
Steam cleaners: If your rug is extremely soiled, it could be worth it to let a commercial steam cleaner. Vacuum the rug first, then follow the manufacturer’s directions on how to run the machine.
Check related blogs about Rug Cleaning:
Should I Take My Rug To My Dry Cleaner in Rosemead
Why You Need To Buy A Rug in Rosemead
