What Is The Ideal Way To Clean A Rug?
Area rugs are a excellent way to add warmth and character to your decoration, but after prolonged use, they will require a fantastic cleaning to seem like new. For most modern rugs, cleaning can be a once-a-year DIY job which saves you the cost of specialist cleaning. If your rug is labeled with specific cleaning instructions, follow those. Otherwise, use this guide from Green Carpet’s Rug Cleaning to learn how to clean a rug along with general rug maintenance hints.
In general, area rugs only have to be deep cleaned annually. Here are a few ways to Find out if it is time for Rug Cleaning in San Jose:
1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.
2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.
3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.
Cleaning a rug just requires a couple of basic tools. You may need:
Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan
Before cleaning a rug, read the care instructions on the rug’s label. Try to pick a time to clean your rugs if there will be a few sunny, hot days together. It could be easier to clean your rugs outdoors, and sunshine and warm air will help them dry faster and thoroughly. Additionally, the sunlight is a natural and effective deodorizer, which will keep most of the dust and dirt out of the home. Whether an outside area is not available, use any floor area which moisture won’t damage (like vinyl or concrete floor in the kitchen or kitchen.)
Shake or conquer Take smaller rugs and darkened rugs outdoors and give them a fantastic shake to release loose dirt and dust. If the rug is large, ask a spouse for help to hang the rug above a porch rail or over a couple solid chairs. Use a broom or rug beater to reach on the rug around to loosen deeply embedded dirt. Do not forget to shake the rug pad too.
Fill the other bucket with clean water.
Test the rug for colorfastness: Prior to cleaning a rug with any kind of solution, it should be examined for colorfastness to prevent damage. Dab the cleaning solution on a small corner of the rug with a white towel. Let the test spot dry thoroughly, then check again to make certain colours have not bled or faded.
Scrub, if needed: If the rug is colorfast, put on the soap solution to the rug with a soft-bristle brush or sponge. Dip the sponge/brush into the cleaning solution. Don’t over-wet the fibers–only use as much as needed. Use gentle pressure to gently scrub the rug. Work in a 3- by 3-foot location. Rinse the sponge/brush frequently so the dirt will not be transferred.
Rinse the rug thoroughly: It’s important not to leave any soap material on the rug. Dip a clean sponge in the rinse water and then remove any soap in the region just cleaned.
Blot: Push out as much excess water as you can with a squeegee and moving from the path of the rug nap. Scrub, rinse and blot a place before going to the next.
Let the rug dry completely prior to bringing it back indoors, rotating it occasionally to promote even drying. Once inside, turn on fans to promote greater air circulation and assist the rug dry completely.
Adjust rug fibers: Once the rug has dried thoroughly, lightly examine the rug using a vacuum or a soft-bristle brush to Blend the fibers.
Steam cleaners: If your rug is extremely soiled, it could be worth it to let a commercial steam cleaner. Vacuum the rug first, then follow the company’s directions about how best to operate the machine.
Check related blogs about Rug Cleaning:
Make A Weekly Cleaning Schedule in San Jose
