Area rugs are a great way to add warmth and character to your decor, but after prolonged use, they will need a fantastic cleaning to look like new. For many modern rugs, cleaning may be a once-a-year DIY project that saves you the expense of professional cleaning. If your rug is labeled with specific cleaning instructions, follow those. Otherwise, use this manual from Green Carpet’s Rug Cleaning to learn how to clean a rug and basic rug maintenance hints.
In general, area rugs just have to be deep cleaned annually. Listed below are a Couple of ways to determine If It’s time for Rug Cleaning in Woodside:
1. Lift a corner of the rug and lightly kick the back. If the rug releases a large cloud of dust, it definitely needs some attention.
2. Run your hand against the rug face in a circular motion for 10 seconds, then look at your palm; if your hand is dirty, then so is the rug.
3. Check for signs of deeply embedded dirt by looking at the rug backing. Deep-down dirt will settle along the warp and weft of the rug and can be seen in the backing.
Cleaning a rug just requires a couple of basic tools. You may need:
Rug beater or broom
Rug shampoo or safe cleaning solution
Two 5 gallon buckets
Large sponges
Towels
Large tarp
Fan
Prior to cleaning a rug, read the care instructions on the rug’s label. Try to pick a time to clean your rugs if there will be a few sunny, hot days together. It may be easier to clean your rugs outdoors, and sun and warm atmosphere will help them dry faster and thoroughly. Plus, the sun is a natural and effective deodorizer and this will keep most of the dirt and dust out of the home. Whether an outside area isn’t available, use any floor area which moisture will not damage (like vinyl or concrete floor in the kitchen or garage.)
Shake or beat: Take smaller rugs and medium-sized rugs outside and give them a fantastic shake to discharge loose dust and dirt. If the rug is large, request a spouse for help to hang the rug over a porch rail or above a couple solid chairs. Do not forget to shake out the rug pad too.
Fill the other bucket with clean water.
Test the rug for colorfastness: Prior to cleaning a rug with any type of solution, it needs to be examined for colorfastness to avoid harm. Dab the cleaning solution on a small corner of the rug with a white towel. Check to find out whether any color transfers to the towel. Allow the test place dry completely, then check again to make sure colours haven’t bled or faded.
Scrub, if necessary: When the rug is colorfast, apply the soap solution to the rug with a soft-bristle brush or sponge. Start at one end of the rug. Dip the sponge/brush to the cleaning solution. Do not over-wet the fibers–only use as much as needed. Work in a 3- by 3-foot area. Rinse the sponge/brush frequently so the dirt will not be transferred.
Rinse the rug thoroughly: It is important not to leave any soap substance on the rug. Soap will attract more dirt. Dip a clean sponge in the rinse water and then remove any soap from the region just cleaned.
Blot: Drive as much excess water as possible with a squeegee and moving in the path of this rug nap. Scrub, rinse and blot an area before going into the next.
Dry: Hang up the rug to dry, or lay the rug flat, face-up and prop the bottom with risers to permit for air circulation. Let the rug dry completely prior to bringing it back indoors, rotating it occasionally to promote even drying. Once inside, turn on fans to promote more air circulation and help the rug dry more completely.
Adjust rug fibers: Once the rug has dried completely, lightly go over the rug using a vacuum or a soft-bristle brush to refresh the fibers.
Steam cleaners: If your rug is extremely soiled, it may be worth it to rent a commercial steam cleaner. Vacuum the rug first, then follow the manufacturer’s instructions about the best way best to operate the machine.
Check related blogs about Rug Cleaning:
Make A Weekly Cleaning Schedule in Woodside
What Type Of Rug Is Easiest To Keep Clean in Woodside
